Factors Why a Hot Water Tank Will Explode

Posted by on Jan 22, 2015 in Gas Water Heater Repair Fort Collins, Water Heater Repair Fort Collins, Water Heater Safety

With regards to needing to perform servicing on ones water heater, it is a comparatively minimal maintenance home appliance.  Nevertheless, one necessary aspect of it has to be checked out routinely.  Water Heater Repair Fort Collins would like to pass on this safety material regarding ones water heater today.Water Heater Repair Fort Collins

Abnormal temperature if mixed with tank deterioration inside the storage tank might cause an explosion. Whenever the water temperature is less than 212 degrees Fahrenheit, one is going to be secure from an explosion, though there is a real danger of scalding at that temperature.  However, if the water temperature is more than 212 degrees, water transforms into steam, which will enlarge to 1,700 times the space it takes up as water. This is the time an explosion can take place.

Cautionary Indicators of a Water Heater Explosion

The leading sign is if one goes to get hot water from a faucet and only steam comes out.  Quickly shut off electric power if one owns an electric water heater.  If one owns a gas hot water heater, shut off the gas valve on the water heater.  After that, give us a call to come check out the problem.

Minimizing Potential Water Heater Dangers

The primary upkeep job having a water heater is to check the pressure relief valve, often known as the T&P valve, on a standard schedule.   This valve helps manage the pressure accumulation within the water storage tank to hinder a serious increase in temperature and overpressure.

Take note, the water release coming from a T&P valve might be really hot. If you do not feel at ease examining the valve inform us.  Additionally, engaging in any sort of fixes to the valve ought to be undertaken by a qualified plumbing repair business.

How to Test the T&P Valve

Clear the spot close to the overflow pipe and floor drain.
Raise the test handle for roughly 5 seconds or until the water runs clean.
Let go of the handle.
If the T&P valve keeps on running with water, lift up the handle up and down rapidly to have it reseat itself.  One might have to do this a couple of times.  IF it has not been tested for a while, it might be difficult to raise it at first.  Avoid using a lot of force, however might need to utilize just a little.
If the T&P valve continues to leak, it ought to be changed.

Some other items to watch out for are deterioration on the stem of the valve.  If there is any water dripping out of the valve stem or out of the drain valve.

Searching for far more recommendations?  Take a look at Water Heater Repair Fort Collins’s additional articles right here:

Water Heater Regulation Updates

Fort Collins Water Heating Savings Advice

From around the Web:

The Aquanta smart water-heater controller promises to slash your energy bill

Home maintenance checklist: Fall